Adhesives
Non-metallic substances capable of joining materials by surface bonding (adhesion), and the bond possessing adequate internal strength (cohesion).
Select application
Bag and Sack Manufacturing
Water-based and hot-melt adhesives along with energy-curable and water-based coatings used in the construction of single & multi-wall bags and sacks.
Bookbinding
Aqueous and hot melt adhesives designed to bind specific paper stocks and cover materials on a variety of application equipment. These value-added adhesives, which include Safe-T-Melt®, Purmelt®, Technomelt® and Disp-O-Fusion® technologies, are formulated to help optimize our customers processes and achieve the highest quality standards possible.
Case and Carton Sealing / End of Line
Hot melt adhesives for the secure sealing of cartons and cases.
Chipbonder / Surface Mount Adhesive
Adhesives to hold SMT components during wave soldering.
Composite Assembly
Materials used in the manufacture and assembly of reinforced plastics such as epoxy and glass or epoxy and carbon fiber.
Bonding Films
Adhesives in film form used to laminate or bond honeycomb assemblies. Commonly used in aerospace applications.
Liquid Shims
High compressive strength paste materials used to fill gaps between composite skins and rib stiffeners. Liquid shims are an effective and efficient way to fit up pre-cured composite parts and transfer load effectively to minimize fatigue induced cracking.
Low Viscosity Wet Lay-Up Pastes
Low viscosity unfilled resins for impregnation of dry composite fabrics for wet lay-up and composite repair.
Mold Sealers
Materials used to reduce the porosity of metal and composite molds, producing better surface quality.
Non-Expanding Syntactic Films
Structural thermoset foams used to strengthen high performance composite assemblies.
Release Agents
Material placed on the surface of a mold so that material molded in the mold can be removed without damaging the mold.
Resins
Polymerized synthetics or chemically modified natural resins that are used with fillers, stabilizers, pigments, and other components to form plastics.
Surfacing Films
Surfacing films avoid read-through of core structures of composites thus providing a perfect surface for painting without out fillers.
Peel Ply
Peel ply is a tightly woven fabric impregnated with release agent. The peel ply will stick to a laminate, but it will pull away without too much difficulty prior bonding or coating.
Container Labeling
Hot melt and water-based adhesives for container labels.
Corrugated Box Assembly / Paper Converting
Adhesives and coatings used in the production of boxes, cartons, bags, laminations, and point-of-purchase displays.
Die-attach
To bond silicon dies to substrates.
Die-attach electrically conductive
To bond silicon dies to substrates - electrically conductive.
Direct Glazing
Adhesives used to attach glass to metal in a flush application.
Repair
To restore to a good or sound condition after decay or damage.
Bonding
Adhesives used to attach glass to metal in a flush application at OEM production.
Direct Mail
Adhesives and coatings that deliver optimal adhesion and aesthetic effects for direct mail campaigns
Electrically Conductive
Paste adhesives used in electronis with conductive properties.
Electrically Non-Conductive
Paste adhesives used in the manufacture of electronic components with electrical insulation property.
Electronics
Chipbonder / Surface Mount Adhesive
Adhesives to hold SMT components during wave soldering.
Thermally Conductive
Thermal conductive adhesives conduct heat. Adhesives used to attach heat sinks to high heat generating electronic components. Thermal adhesives eliminate the need to mechanically fasten down heat sinks with clips or fasteners providing an efficient method of thermal transfer between electronic devices and heat sinks.
Die-attach
To bond silicon dies to substrates.
Die-attach electrically conductive
To bond silicon dies to substrates - electrically conductive.
Electrically Conductive
Paste adhesives used in electronis with conductive properties.
Underfiller
To increase reliability of Flip Chips / CSP's / BGA's.
Electrically Non-Conductive
Paste adhesives used in the manufacture of electronic components with electrical insulation property.
Envelope Manufacturing
Adhesives for the envelope market including front seal, side seam, back, and window patch gum products.
Flexible Packaging
Bonding PE-bags
Bonding polyethylen with 1&2 part Polyurethan adhesives.
Aluminum-Paper lamination
Used for insulating materials.
film-film lamination
Packaging material for food industry bonded by Polyurethanadhesives
Coating Smart Cards
Manufacturing/Protection for smart cards.
Flexible printed circuits lamination
Protection for flexibel printed circuits.
film-foil lamination
Packaging material for foodindustry bonded by Polyurethanadhesives.
Folding Carton Assembly
The use of various types of hot-melt and cold glue adhesives to preassemble a folding carton before delivery to the end-user. Water-based & energy-curable coatings are also utilized to add visual, protective, and performance enhancements.
Industrial Bonding
Adhesives specifically designed to aid in the manufacture of components and materials.
Acrylic - General Purpose
Exhibits performance characteristics applicable to a wide range of applications.
Epoxy - General Purpose
Exhibits performance characteristics applicable to a wide range of applications.
Epoxy - High Performance
Exhibits high toughness properties including shear, peel, and impact strength and fracture toughness.
Epoxy - High Temperature
Maintains at least 50% of initial strength at elevated temperatures to 150°C / 300F.
Epoxy - Light Cure
Cures using UV or visible light.
Hot Melt - EVA
High performance hot melt adhesives based on ethylene vinyl acetate (EVA) polymers
Hot Melt - Polyurethane
Moisture curable hotmelts for a broad application.
Hot Melt - Polyolefin
High performance hot melt adhesives based on polyolefins
Hot Melt - Polyamide
High performance polyamide hot melt adhesives
Hot Melt - Pressure Sensitive
Bonds surfaces with minimum amount of pressure. Tacky qualities.
Instant - General Purpose
Exhibits performance characteristics applicable to a wide range of applications.
Instant - Flexible
Maintains semi-flexible bond after cure.
Acrylic - High Performance
Exhibits high toughness properties including shear, peel, and impact strength and fracture toughness.
Instant - Light Cure
An adhesive that cures when exposed to UV and/or visible light and humidity.
Instant - High Temperature
Maintains at least 50% of initial strength at elevated temperatures to 50°C / 120F.
Instant - Toughened
Exhibits high toughness properties including shear, peel, and impact strength and fracture toughness.
Instant - Low Odor / Low Bloom
Where low odor is required and/or where low whitening is required.
Light Cure - Anaerobic
Adhesive in bondline cures in the absence of air, excess of adhesive cures by UV or visible light.
Light Cure - Cyanoacrylate
An adhesive that cures when exposed to UV and/or visible light and humidity.
Light Cure - Epoxy
An adhesive that cures when exposed to UV and/or visible light.
Light Cure - Silicone
A polymer that cures when exposed to UV and/or visible light.
Multi-Use
Adhesive with a very broad application spectrum.
Acrylic - High Temperature
Maintains at least 50% of initial strength at elevated temperatures to 90°C / 200F.
Other - Toughened
Resists peeling forces for a stronger bond.
Light Cure - Acrylic
An adhesive that cures when exposed to UV and/or visible light.
Non-Conductive Pastes
Paste adhesives used in the manufacture of electronic components with electrical insulation property.
Other - Flexible
Solvent Based - Nitrile Phenolic
Adhesives designed around high temperature and high toughness nitrile phenolic chemistry.
Solvent Based - Nitrile
Adhesives designed around nitrile chemistry.
Solvent Based - Other
Solvent Based - Thermoplastic Rubbers
Adhesives designed around thermoplastic rubbers.
Acrylic - Magnet Bonding
Specially suited to bonding magnets
Water Based - Urethanes
Adhesives designed around polyurethane dispersion chemistry.
Water Based - Pressure Sensitive Adhesive
Adhesives generally applied to one substrate and bonded with pressure.
Polyurethane - General purpose
Polyurethan adhesives with general properties.
Solvent Based - Urethanes
Adhesives designed around elastomeric polyurethane chemistry
Polyurethane - High performance
Polyurethan adhesives with specific properties.
Polyurethane - High Temperature
For temperature resistant adhesives joints.
Polyurethane - Plastic bonding
Especially suited for plastic bonding.
Solvent Based - Neoprene
Adhesives designed around flexible neoprene chemistry.
Acrylic - Metal Bonding
Specially suited to bonding a variety of metals including steel, aluminum, stainless steel, and galvanized
Acrylic - Polyolefin Bonding
Specially suited to bonding polyolefin (low surface energy) plastics.
Acrylic - Plastic / Composite Bonding
Specially suited to bonding a variety of plastics and composites
Epoxy - Fast Setting
Fixtures in less than 15 minutes.
Epoxy - Chemical Resistant
Resists a wide variety of solvents, polar and non-polar.
Inserting / Onserting
Our aqueous and hot melt adhesives are used to adhere a variety of substrates to specific paper stocks in inline and offline applications. These products are designed to have sufficient adhesion properties while presenting optimum removability when needed.
Lamination
Combining two or more layers of materials together by using adhesives.
Film-Film
Bonding of two/more films together.
Solvent Based
Bonding two or more layers together via an adhesive carried in solvent. The adhesive cures by chemical reaction.
Solventless
Bonding two or more layers together via an solventfree adhesive that cures by chemical reaction.
Film/Foil
Used for flexible packaging materials.
Water Based
Bonding two or more layers together via an adhesive carrier in water. The adhesive cures by chemical reaction
Flat Lamination
Bonding two or more small/large sheets together to get panels.
High-gloss lamination
Specific Polyurethane adhesives are used.
Lamination Wet Bond
The coating of adhesive on a substrate while in its liquid state
Paper Converting
Water-based adhesives utilized for the wet lamination of various types of substrates including paper and boardstocks, films, and foils.
High Pressure Lamination
A flexible, yet brittle, decorative layer for bonding to core substrates. End use is counter tops, store fixtures, workstation surfaces and case goods.
Insulation
Adhesives used to laminate flexible duct insulation and various films of foil, scrim kraft directly to insulation.
Wood
Assembly of parts that are edge glued to create dimension panels, face adhered to create turning stock, or finger jointed to create long lineal components from shorter wood stock.
Nonwoven Hygiene Assembly
Adhesives for the production of diapers, feminine hygiene products, bed pads, medical drapes/gowns and specialty nonwoven laminations.
Phase Change - Electrically Non-Isolating
Phase change electrically non-isolating materials are thermal Interface materials with low thermal impedance. Non-isolating materials have both thermal and electric conductivity properties.
Preformed Parts & Foam
Pre-configured shapes and forms used to seal and strengthen structural applications
Structural Patches
Materials placed on a desired surface to increase stiffness.
Foams
A light weight polymer made by the incorporation of air.
Structural Parts
A structural foam used to strengthen hollow voids.
Structural Tapes
Adhesives in tape form used to strengthen joints.
Retaining Cylindrical Assemblies
Retaining cylindrical assemblies is the use of anaerobically cured retaining compounds to increase the shear strength of cylindrical, non-threaded assemblies.
Close Fitting / Press Fit
Pushing shaft/hub assemblies with interference together forming a friction joint. Adhesives in the joint increase load bearing capability significantly.
General Purpose, Medium Strength
Lower strength, Repairable
Loose Fitting / Slip Fit
Pushing shaft/hub assemblies with no interference together. Adhesives in the joint form the connection between the two parts.
Machinery Repair
A family of products used in the repair of machinery such as drill presses, motors, and gear pumps.
Structural Bonding
An adhesive which is capable of sustaining in a structure a specified strenght level under a combination of stresses for a specified lenght of time.
Structural Metal
Adhesives used in the lamination or bonding of metal substrates where performance criteria can be predicted.
Anti-Flutter
Rubber based materials used to bond two surfaces together and also to reduce vibration.
Friction Bonding Materials
High temperature performing materials used in brakes, clutch plates and other friction bonding applications.
High Temperature Assembly
Adhesives with performance criteria above 250° F (120° C).
Metal and Honeycomb Assembly
Adhesives designed to laminate metal and join honeycomb core reinforcement. Commonly used in aerospace applications.
Mold Releasers
Coatings used as aids in the manufacture of adhesive-bonded assemblies that prevent the adhesive from sticking to the mold.
Mold Sealers
Materials used to reduce the porosity of metal and composite molds, producing better surface quality.
Plastic and Composite
Materials used to bond plastic and composite assemblies.
Metal/Metal
Adhesives used in the lamination or bonding of metal substrates where performance criteria can be predicted.
Substrate Type
Magnetic
Metal
Paper
Plastic
Rubber to Metal
Textile
Wood
Metal to plastic
Surface Preparation
Conversion, conditioning and cleaning of a surface so that nothing is left on the base surface and so that a product can adhere completely to the base surface.
Tape and Label Converting
Coatings and adhesives for aesthetic and functional labels and tapes.
Tapes
Flexible baking or carrier coated with a pressure sensitive, remoistable or heat activable adhesive.
Thermally Conductive
Thermal conductive adhesives conduct heat. Adhesives used to attach heat sinks to high heat generating electronic components. Thermal adhesives eliminate the need to mechanically fasten down heat sinks with clips or fasteners providing an efficient method of thermal transfer between electronic devices and heat sinks.
Thread sealing
Seal threaded components like plugs, pipes, and fittings.
For Metal and Plastic Parts
For Metal Parts
For Plastic Parts
Threadlocking
Adhesive to prevent the loosening of threaded fasteners caused by vibration.
For Plastic Parts
Permanent High Strength
Specifically designed to be used only where the fastener will not be removed.
Wicking
Allows application after assembly of the fasteners.
Removable Medium Strength
Designed for most common applications and fastener sizes.
Low Strength
Designed to lock thread without damaging the threads upon removal.
Tissue & Towel Manufacturing
High performance adhesives for the production of consumer and industrial household toweling, bathroom tissue and facial tissue.
Tube Winding
The use of water-based adhesives to construct paper-based tubes and cores for a wide range of end-uses.
Underfiller
To increase reliability of Flip Chips / CSP's / BGA's.
Wood Bonding and Assembly
Adhesives to bond wood to plastic and steel.
Acrylic
A structural adhesive capable of bonding a broad range of substrates.
EVA (VAE)
Laminating and assembly, may be catalyzed to impart environmental resistance.
Natural Polymers
Casein, Dextrin based adhesives, Type III. Not for use with plastic or steel.
PVA
General purpose water based adhesive, interior use, not water resistant.
Rubber - Natural & Synthetic
Contact adhesives, rigid to porous material bonding.
Solvent Free
Water based contacts, PVA cross links, general assembly, lamination.
Urethane Dispersions
Rigid bonds, water resistant, slow to fast setting, structural properties.
Water Soluble Polymers
Solvented contact adhesives, capable of bonding a broad range of substrates.
Your download folder contains the following files:
Please mark at least one file
