Cleaners
Substances capable of removing dirt, grime, or impurities from a surface. Correct surface cleaning is necessary for optimum bonding and sealing. Bond strength is determined to a greater extent by the adhesion between the joint surfaces and the adhesive. It is important to understand that adhesive joints are stronger the more thoroughly the surfaces are cleaned. The complete removal of oil, grease, dust and other residual dirt from the bond surface is required for the best adhesive joint.
Select application
Aircraft Appearance and Part Cleaning
Neutral, acid or alkaline cleaning systems used in immersion tanks, spray or brush applications.
Exterior and Engine Cleaners
Specifically designed to be used in fuselages, and aircraft engines.
Flap and Landing Gear Cleaners
Specifically designed to be used in flight control surfaces, landing gears and doors.
Aircraft Depaint and Repaint Systems
Paint strippers to remove paint from an aircraft surface without damaging the metal below. Seals the surface with a corrosion protecting layer while enhancing paint adhesion.
Alkaline Cleaners
A cleaner made with an alkaline chemical base.
Conversion Coatings
A protective surface layer on a metal that is created by chemical reaction between the metal and a chemical solution.
Corrosion Removers
Removes corroded material.
Paint Strippers
Chemical that removes paint from substrates.
Anodizing
Coating a metallic surface electrolytically to enhance bonding with a protective or decorative oxide.
Application Method
Ultrasonic
Supporting cleaning action with frequencies above those of audible sound.
Immersion
The sinking until covered completely with cleaner, submersion.
Spray
To scatter in the form of fine particles.
Cleaners
Substances used to prepare molds, capable of removing dirt, grime, or impurities.
Contact Cleaners
Chemicals specifically designed to clean electrical contacts.
Corrosion Remover
Cleaners that remove corroded material.
Degreasers
Industrial substance to remove grease, oil or other fatty substances from the surfaces of metal parts.
Electrical Components
Cleaner that dissolves dirt, grease and oil from a wide range of electrical components.
Gasket Removers
Cleaners that removes gaskets and all types of gasketing adhesives and sealants.
Hand Cleaners
Cleaners for removing unwanted contaminants from a persons hands
Instant Adhesive Clean-up
Cleaners designed to remove super glue
Jet Engine Overhaul Cleaners
Cleaners are engineered for safety and efficiency on interior and exterior aircraft surfaces.
Jet Engine Overhaul General Purpose Cleaners
Cleaners that can be used for a variety of applications.
Jet Engine Overhaul Interior Cleaners
Jet Engine Overhaul Compressor Washes and Thrust Reverser Cleaners
Specifically designed to be used while engine is on aircraft
Paint Line / Strippers
Cleaner designed to remove paint
Eco Cleaner
Environmentally friendly products.
Paint Line Cleaner
Solvent Borne
Water Borne
Parts Cleaning
Cleaner designed to remove deposits and soils from metals.
Automotive
Industrial
Sealer Line
Cleaner designed to remove sealant from sealer lines.
Substrate Type
Composite
Glass
Light Metal Aluminum
Multi-Metal
Plastic
Steel
Your download folder contains the following files:
Please mark at least one file
