Sealants

Automotive Body Shop

Rubber based material that are effective on oily metal substrates. Designed to cure at e-coat oven temperatures.

Expandable Sealants
Products capable of sealing where tolerances of mated sheet metal are not within spec

Non-Expandable Sealants
Products capable of sealing without expansion where bridging or gap filling is not required

Porosity Sealants
Anaerobic and heat cure sealants designed to seal porosity in metal and plastic parts.

Tapes
A continuous narrow, flexible strip of cloth, metal, paper, or plastic, such as adhesive tape, magnetic tape, or ticker tape.

Weld-Through Sealants
Sealants capable of withstanding heats that are produced during welding. Can often flow and seal the welded areas.

Automotive Paint Shop

Rubber based material that are effective on oily metal substrates. Designed to cure in the paint bake ovens.

Expandable Sealants
Products capable of sealing where tolerances of mated sheet metal are not within spec.

Non-Expandable Sealants
Products capable of sealing without expansion where bridging or gap filling is not required.

Porosity Sealants
Anaerobic and heat cure sealants designed to seal porosity in metal and plastic parts.

Tapes
A continuous narrow, flexible strip of cloth, metal, paper, or plastic, such as adhesive tape, magnetic tape, or ticker tape.

Components

Electronics Sealing & Gasketing

A substance used to seal a surface to prevent passage of a liquid or gas.

Industrial Sealants

A broad range of products used to seal a surface to prevent passage of a liquid or gas.

Industrial Ambient Cure - Modified Silane Polymer
One or two component silane modified polymer material that uses humidity moisture to cure as an elastic adhesive or sealant.

Industrial Heat Cure - PVC
PVC based sealing material. Expandable and non-expandable.

Industrial Heat Cure - Rubber
Rubber modified sealing material utilized in automotive body shop applications.

Industrial Heat Cure - Silicone
A silicone that cures when exposed to heat.

Industrial High Performance

Industrial High Temperature

Industrial Light Cure - Acrylic
An acrylic adhesive that cures when exposed to UV and/or visible light.

Industrial Light Cure - Anaerobic (Hot Melt)
An anaerobic adhesive that cures when exposed to UV and/or visible light.

Industrial Light Cure - Silicone
A silicone that cures when exposed to UV and/or visible light and may have a secondary moisture cure as well

Industrial Light Cure - Visible Light
An adhesive that cures when exposed to visible light.

Industrial Fast Setting
Permits higher throughput due to faster fixture times.

Industrial Moisture Cure
An adhesive or sealant that uses mositure in the air to cure

Industrial General Purpose - Alkoxy
General purpose moisture cure silicone that is neutral curing, non-corrosive.

Industrial General Purpose - Acetoxy
General purpose moisture cure silicones that tend to have better adhesion at a lower cost than most other silicones, and evolves acetic acid upon curing

Industrial General Purpose - Hot Melt
Low cost, general purpose sealant.

Industrial General Purpose - Solvent Based
Sealants based on polymers dissolved in organic solvent solution as its primary solvent.

Industrial General Purpose - Water Based
Sealants based on polymers dispersed in water as its primary solvent.

Industrial Heat Cure - Acrylic
PVC free sealing material

Industrial Heat Cure - Epoxy / PVC Hybrid
Utilized in automotive body shop applications

Substrate Type

Glass

Magnetic

Metal

Paper

Plastic

Textile

Wood

MS Polymers
One or two component silane modified polymer material that uses humidity moisture to cure as an elastic adhesive or sealant.

Foam

Tapes

Flexible baking or carrier coated with a pressure sensitive, remoistable or heat activable sealant.

Thread sealing

Seal threaded components like plugs, pipes, and fittings.

For Metal and Plastic Parts

For Metal Parts

For Plastic Parts