Tangit FP800 Fire Protection Coating
Dispersion based fire protection coating.
PROPERTIES
- Intumescent when heated
- Tested according EN 1366-3
- Complies with DIN 4102, MLAR 2005/LAR/RbALei, NEN 1366-3
- Free of halogens, heavy metals and organic solvents
- Easy to apply with soft brush
- Sprayable
TESTING AND APPROVAL
Complies with EN 1366-3, DIN 4102, MLAR2005/LAR/RbALei, NEN 1366-3
ABZ: Z-19.11-1357
APPLICATION SCOPE
For fire resistant and smoke tight closing of bulkheads around pipes and cables in walls and ceilings. Tangit FP 800 is obligatory part of all applications with Tangit FP 550.
| TECHNICAL INFORMATION | |
| Material: | synthetic resin dispersion coating |
| Colour: | white |
| Viscosity: | approx. 40,000 mPa.s |
| Density: | approx. 1.25 g/cm3 |
| pH value: | pH approx. 7.8 |
| Solid material content: | approx. 66% |
| Application temperature: | +5°C to +40°C opt is +20°C to +25°C |
| Temperature stability: | -20°C to +50°C |
| Recommended min.: | wet 1.5 to 1.7mm |
| Layer thickness: | dry 1.0 to 1.2mm |
| Amount used at rec.layer thickness: | 1.5 kg/m2 |
| Curing time: | dependent on temperature and relative humidity: touch dry within one hour at 23°C and 50%; completely cured after approx. 2 days. |
| Cleaning equipment: | water |