4/1/2009, Irvine, California
Henkel Launches Next-Gen Underfill that has it All
Hysol UF3800 flows fast at room temperature and cures quickly at low temperature. The lack of need for substrate pre-heat combined with the material’s faster flow and low temperature quick curing mechanism, enables manufacturers to reduce energy costs, eliminate capital equipment expenditure associated with dispensing system heaters, and substantially improve throughput rates. In addition, the material is reworkable, which improves final yield while allowing assembly firms to maintain environmental responsibility through the reduction of scrap. Sustainability is also a key component of Hysol UF3800, as it is a halogen-free material that meets the current accepted industry standard of less than 900 parts per million (ppm) chlorine (Cl) and bromine (Br).
One of the more common issues with traditional underfill systems has been underfill/solder paste compatibility with today’s lead-free and halogen-free solder formulations. Incompatibility can lead to incomplete underfill cure and, ultimately, device failures. Hysol UF3800, however, is compatible with a variety of lead-free and halogen-free solder pastes, conferring exceptional process flexibility, outstanding performance and in-field reliability. In addition, the unique chemistry of the material offers a relatively high glass transition temperature (Tg) required for improved thermal cycle performance as well as good reworkability – two properties that are normally counter to each other. In most cases, reworkable materials have a low Tg, which then also lowers the thermal performance. But Hysol UF3800 offers both a high Tg and reworkability.
“Manufacturers want to reduce overall costs, but they don’t want to do so at the expense of performance or processability,” explains George Thomas, Henkel’s Global Market Manager for Handhelds. “With Hysol UF3800, assemblers now get their wish: exceptional performance, cost-efficiency, environmental responsibility and process flexibility. This material has it all and then some.”
Adding to the long list of benefits, Hysol UF3800 also offers stable electrical performance under temperature humidity bias (THB), an essential performance metric as devices continue to get smaller and I/O pitches become tighter.
“Traditional commercial underfill products do not offer the combination of benefits delivered by Hysol UF3800,” concludes Thomas. “Other materials may provide some – for example, fast cure and reworkability characteristics – but not the complete range of unique advantages delivered by Hysol UF3800.”
Hysol UF3800 is the only known commercial material to provide fast flow at room temperature, low temperature fast curing, high Tg, reworkability, excellent thermal performance and stable electrical performance under THB – all in a single formulation. For more information on Hysol UF3800 or any of Henkel’s advanced underfill technologies, contact Henkel via phone at +1-949-789-2500 or online at www.henkel.com/electronics