In a recently produced video, a climber shows the superior performance of the Henkel Loctite 3090 super glue.

Labeling adhesives have to satisfy multiple requirements. A new generation of casein-free adhesives now offers extended properties and a performance profile that ensures trouble-free production processes for beverage manufacturers while extending their options. As the leading supplier of adhesive technologies, Henkel is dedicated to application-driven research and development of innovative solutions that respond to the growing needs of the market and the environment.

For the eighth year in a row, Henkel has accompanied the competing teams as one of the main sponsors of the Dakar Rally. This year’s route was 8,377 kilometers long and was held in the mountains and deserts of Argentina, Chile and Peru. With a Loctite first aid box and skilled Henkel mechanics, Henkel supported the race.

In a significant formulation breakthrough, Henkel Electronic Materials announces that it has developed a new electrically conductive adhesive (ECA) compatible with lower-cost, tin-terminated components to enable more cost-effective assembly processes.  The new material, Ablestik ICP-3535M1 is a one-component, pre-mixed ECA that provides low and stable contact resistance when used with 100% tin-terminated components.

Henkel Iberica sponsors Dakar Rally winner Marc Coma and his team at the 2012 Dakar Rally in hopes of further promoting its Loctite adhesives and sealants. Coma currently ranks second in this year’s competition.

Henkel-sponsored freestyle snowmobiler Levi LaVallee just shattered his standing world record for distance jumping on a snowmobile by soaring 412 feet, 6 inches over San Diego harbor. LaValle, who relies upon Loctite brand adhesives and sealants to keep his sled in top form, blasted toward the takeoff ramp at 100 mph, launched through the air across the gap between the North and South parks of Embarcadero Marina Park, and touched down forcefully but safely on the exit ramp.

The Dakar Rally! The world’s most grueling and most challenging annual off-road cross-country rally. Hosted in South America, this year’s Dakar Rally entails surmounting nature’s forces like the wide plains in Argentina, the gigantic Andes Mountains and the severe desert climate from Chile to Peru – and these natural forces are the major hurdles during this race.

Fossil fuels are finite, but the sun’s energy is inexhaustible – all of our planet’s energy resources in the form of oil, coal and natural gas add up to just 20 days of sunlight. Energy from the sun is not only a dependable long-term option but clean as well, and that is why it makes sense as an alternative to fossil fuels. This is the credo of Novatec Solar. Headquartered in Karlsruhe, Germany, this company uses its own patented concentrated solar thermal technology to operate the first commercial power plant of this kind. Since 2006, Novatec and Henkel have been jointly developing a high-tech adhesive solution for this application. 

Modern chemical autodeposition processes have evolved into a powerful alternative to cathodic dip coating (e-coating). Especially in cases where uniform coating of interior surfaces and edges is required, or where powder topcoating is used, they can deliver significantly better corrosion protection results. In Germany, companies like Räckers and BBL have therefore opted for the non-electric Aquence technology from Henkel, a sustainable coating process that additionally does completely without hazardous heavy metals.

Sustainability and glamour – can the two be combined? Very well in fact, as MiraFoil from Henkel shows. At topac GmbH, a company specializing in print products and carton packagings, the environmentally sustainable metallic-effect UV coating delivered convincing results in extensive practical trials.

The Italian Technology and Passion Club conferred Europe’s most prestigious awards for innovations in tissue and towel manufacturing in October. The year 2011 event – held in the Tuscan town of Lucca – was sponsored by Henkel.

So near…! After his victory in the Porsche Carrera Cup Germany, the national one-make racing series, Nick Tandy (26) was among the hot contenders for the runner-up in the international Porsche Supercup at last month’s finale under the desert sun of Abu Dhabi. And even if the young Brit sponsored by the General Industry business of Henkel ultimately missed bagging a double title, this hardly cast a shadow on his overall performance.

For the eighth time in a row, Henkel will sponsor the Dakar Rally which takes place January 1 to 15, 2012 in Argentina, Chile and Peru. Loctite and Teroson adhesives and sealants will be used to quickly repair any off-road vehicle, truck or motorbike that has been damaged during the 9,000 kilometres race. To support the racing teams and to ensure that the Loctite and Teroson specialised products are used in the most effective manner, a highly skilled Henkel technical team – so called “Loctite Charlies” – will accompany the rally from the start to the podium in Lima, Peru.

At the Brau Beviale, a capital goods fair for the beverage industry, Henkel will be showcasing its Optal XP product series, a new generation of synthetic adhesives for glass bottle labeling, in the Nürnberg Exhibition Center (Hall 4A/311) from November 9 to 11. 

With lightweighting in mind, automotive manufacturers are using more and more parts made from carbon fiber or glass fiber composites. Henkel has developed a polyurethane-based composite matrix resin that cures faster than the traditional epoxy resins.

As the functionality of modern electronics products has increased exponentially in tandem with decreasing dimensions, the demands on performance and reliability of electronic materials have reached an unprecedented level. Today’s electronic materials – spanning nearly all market sectors – must deliver on consumer performance expectations while also ensuring environmental responsibility and lower costs. Addressing these challenges, Henkel has developed a range of innovations which it will debut from stand 263 in hall 4 at productronica, taking place from 15th to 18th November in Munich, Germany.

Innovative polyamide-based hotmelts will be a main focus of Henkel in Munich from November 15 to 18, 2011, at productronica, the leading global trade fair for electronics production. The Macromelt brand products are injection molded at a pressure of about 40 bar and temperatures of less than 230 degrees Celsius, thus preventing damage to sensitive electronic components and allowing the use of cost-effective mold sets made of aluminum rather than steel. The molding compound cures within just one minute and the components are then ready for further processing.

With the advent of new methods for narrow-surface lamination making use of laser or plasma technology, there is now again a strong focus on bondline quality and on the “zero bondline” in particular. But bondline appearance is just as important in conventional edgebanding with hotmelt adhesives. Recent developments in both machinery and adhesives aim to optimize it further.

By developing a completely new generation of bactericide-free cutting fluids, Henkel has succeeded in banishing the drawback of emulsions splitting in use and the related bad odor nuisance, thus providing a long-awaited answer to a major problem associated with water-miscible metalworking fluids. The new emulsions of the Multan brand have proved themselves in industrial practice.

Henkel’s Loctite brand will be expanding its health and safety range in mid October with not just one but three innovative anaerobic products at once. The retaining adhesive Loctite 6300 for cylindrical assemblies, gasketing product Loctite 5800, and the thread sealant Loctite 5400 all underscore Henkel’s leading role in combining technology with sustainability. The company is the only one to offer a complete portfolio of non-hazardous anaerobic adhesives.

With its new non-hazardous polyurethane hotmelt Purmelt MicroEmission Cool 3400 for perfect binding of books and brochures, Henkel is providing the first powerful adhesive with an application temperature of less than 100 degrees Celsius. This reduces energy consumption and significantly speeds up processes. The result is an extremely strong bond and reliable processing, even with low adhesive consumption.

Henkel received Rexam’s “Be The Best” Excellence Award in the two categories “Silver Operational Excellence Level” and “Total Cost Reduction” in August 2011 as a result of the implementation of new technologies in Brazil. Henkel was the only direct material supplier to receive the highest award category of silver rating from Rexam at the annual Supplier Excellence Conference.

For the first time, Henkel will be present with its own stand at the international congress SolarPACES where it will be presenting innovative solutions for the concentrated solar power (CSP) industry. The high-performance adhesives and sealants from Henkel make a substantial contribution to raising quality and lowering costs in the manufacture of products for the solar industry. The congress is taking place in Granada, Spain, from Tuesday the 20th to Friday the 23rd of September 2011.

Flexibility – not only with regard to packaging, but also along the value chain – is one of the key benefits offered by the latest Henkel innovation Liofol Fast One. The new one-component laminating adhesive features an extremely fast cure, combined with high initial bond strength. At the 7th ICE Europe in Munich, Henkel is presenting the first-ever laminating adhesive that contains no free isocyanates: Liofol Fast One LA 1640-21. Henkel experts with comprehensive know-how will be available to discuss the topic with interested parties, and will present this innovation at Stand 230 in Hall B6.

The energy turnaround and the push to expand renewable energy generation is posing major challenges for manufacturers of wind energy plants. To ensure economic viability, efforts are focusing first on improving the availability and productivity of existing production facilities. One of the wind energy industry’s top priorities is to maximize utilization rates by speeding up manufacturing processes in order to reduce unit costs and achieve a rapid payback on investments. The use of new material technologies is making an important contribution to this.

For three years now, Henkel has been engaging in promoting young engineers. In addition to offering numerous training programs, participation in the annual Formula Student contest for engineering students at the Hockenheimring has become a central component of Henkel’s commitment in this area. The special award for best use of adhesive, which Henkel instituted in 2009, was won this year by the team from Bayreuth University.

At the 26th European Photovoltaic Solar Energy Conference in Hamburg, Henkel will be presenting powerful solutions spanning the entire value chain. To meet the market challenges, Henkel develops innovative adhesives and sealants, because extremely productive manufacturing processes and new concepts for saving materials and energy are vital to the future viability of the solar industry. Customers looking for more information regarding the innovations or who would like to talk to an adhesives or sealants expert will find Henkel in Hall B6, Stand B11.

Breaking new ground in materials innovation, Henkel Electronic Materials has announced its success with a revolutionary silver (Ag) sintering technology that enables high volume production of modern power packages in a process that does not require pressure. In its market debut, Henkel’s Ag sintering capability has been designed into Ablestik SSP2000, a high reliability die attach material well-suited for use with power modules such as IGBTs and high power LED products. 

Henkel announces that it has worked with STMicroelectronics, one of the world’s largest semiconductor companies and advanced chip packaging technology developers, to validate the performance of Henkel’s Ablestik C100 conductive die attach film materials for production of very small package configurations in a process called ScalPack, which incorporates die with extremely small dimensions

Over the past decades, structural adhesives have evolved into effective and dependable alternatives to conventional joining techniques such as bolting, riveting and welding. They can be used to bond almost all materials commonly employed in industrial manufacturing. One essential aspect is selecting the right bonding solution for each particular construction. But which adhesive solutions are available and which factors must be considered in order to get the best results?

The capacity and performance of the diecasting industry is greatly dependent on the development of efficient and sustainable manufacturing technologies. Henkel will be presenting a truly future-aligned product portfolio at GIFA 2011, encompassing innovative solutions right along the entire value chain and offering industrial users all the synergy benefits ensuing from the merger.

In electrical equipment that generates heat, cable bundles must be durably protected against high temperatures. With Terostat 3631 FR, Henkel has developed a flame retardant and easily applied butyl sealant which is especially suitable for applications where low flammability is essential.

Under the motto “Take off to tomorrow”, Henkel is presenting a new generation of hotmelts for edgebanding and profile wrapping at the LIGNA 2011 trade fair in Hannover. In addition to high thermal stability and minimal application weights, the innovative hotmelt Technomelt Supreme is characterized mainly by its use of a new polymer base. By opening up this raw materials category, adhesives manufacturer Henkel is offering its customers not only supply security but also a broader spectrum of product solutions.

At this year’s LIGNA trade fair in Hannover, Henkel is represented as a member of Gütegemeinschaft Dreidimensionale Möbelfronten e.V., a quality association for three-dimensional furniture fronts. Founded in March 2011, the association has set itself the task of establishing a verifiable quality system with the aim of introducing an RAL quality mark. The initiators of this quality association include furniture front manufacturers 3B, Arko and Ilcam as well as finish foil producer Renolit SE and representatives of the panels industry.

Ceramishield RobotIQ is a system developed by Henkel specifically for fully automatic coating of contact tips and gas shrouds in welding robots. This combination of the dry-film coating Ceramishield LW-1 and fully automatic coating equipment offers long-term spatter protection in MIG/MAG robotic welding applications.

With its P3 Scribex 400 series, Henkel has developed a safe and environmentally sound cleaning solution for removing graffiti from rail vehicles. Unlike standard products, these cleaners do not require hazard labeling. They contain no hazardous ingredients, have low flammability and a low content of volatile organic compounds (VOC).

The key criteria for the use of hotmelt adhesives in the packaging industry include high yield, productivity and long-term availability. Under the Technomelt brand, Henkel is now launching two hotmelt adhesives onto the market that have been developed specifically to meet these requirements. Alongside their bond strength, Technomelt Supra 145 and Technomelt Supreme are compelling products affording low consumption values as well as improved flowability in automatic application systems. Both products make use of a new raw material base, which offers the customer a broader spectrum of products, greater choice and enhanced flexibility.

Sealants with new properties offer advantageous design possibilities in numerous industrial manufacturing processes. One such sealant that is especially suitable for use in refrigeration equipment is Terostat 301. In these applications the first heat-conductive butyl sealant from Henkel replaces classic heat-conductive pastes to improve heat exchange between the inner housing and the heat exchanger.

Henkel as a systems provider for medical engineering lately developed the brand-new LOCTITE AssureCure system. The revolutionary technology combines a newly developed LOCTITE adhesive with a new monitoring system. This promises to provide a hitherto unrivalled level of reliability and precision in the curing of light cure adhesives as the basis for perfect bonding.

Designed with modern manufacturing requirements in mind, Henkel Electronic Materials has formulated Multicore MF210, a no-clean sustained activity flux that is compatible with both lead-free and tin-lead processes. The halide-free, resin-free material is effective with a wide range of solder resists, as well as rosin and OSP-based protectants for maximum adaptability.

Henkel – the world market leader in adhesives, sealants and surface treatments for consumers, craftsmen and industrial applications, and Holst Centre – an open-innovation initiative by imec (B) and TNO (NL), announce their partnership in the field of flexible electronics. Henkel’s knowhow in adhesives brings a new field of expertise to the Holst Centre’s shared research programs. It aligns with a large number of Holst Centre activities, such as the research towards large-area flexible OPV and OLED lighting and signage.

Poor sealing of ventilation systems in buildings results in rising energy costs and the formation of mold. Air ducts are often constructed using pre-manufactured rubber compression gaskets to seal the transitions between the individual elements. Over time, however, these gaskets lose their elasticity and become brittle. As they shrink, their sealing effect decreases, leaving cavities in which mold can form.

The Swiss-based Purbond AG is now owned 100 percent by Henkel. Initially established as a 50:50 joint venture with Collano AG, also based in Switzerland, Purbond is a leading global supplier of polyurethane adhesives for load-bearing timber constructions.

The latest in a series of recent materials innovation successes, Henkel Electronics announced the development and commercial availability of its Ablestik C100 series conductive die attach films. With relatively few, if any, conductive die attach films on the market until now, the launch of this material advance effectively establishes the benchmark for conductive die attach film solutions.

New methods and products for the fabrication of composite parts lead to easier and cost-efficient production processes as well as to higher end product performance. For its innovative benzoxazine prepreg resin used for a new composite tooling material, Henkel and its partner Airtech Europe were selected as a JEC Innovation Award finalist. 

From March 29 to 31, Henkel is presenting its innovative solutions with clear benefits for composite customers at the JEC Composite Europe 2011 trade show in Paris. Along with demonstrating the advantages of the products, Henkel representatives will exchange their expertise and experiences with other professionals. 

At the ZOW 2011 in Bad Salzuflen, adhesive supplier Henkel is presenting tailor-made solutions for the production of visually attractive and high-quality furniture. Thanks to a new laminating process, it is now possible to use a newly developed hotmelt adhesive that combines excellent surface quality with high environmental compatibility.

Flexible packages are gaining increasingly large market shares throughout the food industry. At the same time, film/foil laminates have to meet ever more stringent technological and food law requirements. With its international series of “Liofol Academy Road Show” events, Henkel offers packaging manufacturers from Eastern Europe region the opportunity to learn about current challenges and about forward-looking solutions for the packaging industry. 

On February 7, Henkel has launched the Henkel Adhesive Packaging Design Contest (www.packdesign-contest.com). This online contest is about developing innovative ideas and designs for the packaging of Henkel consumer adhesive products.

Filters are used in many different areas and applications to clean air and liquids. When producing consumer and industrial goods, adhesives play a decisive role. To meet the high expectations of industry, Henkel invests in research and develops new technologies. At the FILTECH 2011 trade fair, Henkel will be presenting an up-to-date product portfolio for construction of modern filter systems.

Henkel is presenting its innovative solutions along the entire value chain at the MEDTEC Europe 2011 trade show. In addition to a broad range of specialty adhesives designed for the manufacturing of medical devices, an extensive product portfolio for mechanical processing, metal pretreatment and partial cleaning is presented. The full product offering as well as the newest in adhesive technology, provides a solution for the entire production process.

Starting on Monday, 7th February, Henkel is inviting participants to a packaging design contest. In the Adhesives Packaging Design Contest, everyone with creative skills may submit designs for adhesives packaging. Unlike the usual contests, it will be possible to discuss and vote for the proposals through an online platform; then, a panel of experts from the fields of business and vocational training will select the winner. The best design will be rewarded with prize money of 3,000 euros. The deadline for submission of entries is 18th March 2011.

Succeeding in the toughest rally in the world with Loctite and Teroson

With its Optal XP product series, Henkel has developed a completely new generation of synthetic adhesives for glass bottle labeling that offers an excellent performance spectrum.

For over 50 years, Loctite has provided customers and consumers with advanced adhesive and sealing solutions. With over 5,000 patents, Loctite leads the adhesive category in the industry and it is superglue market leader for consumers.

The use of hotmelts for encapsulating electronic components is on the advance in virtually all sectors of industry. The hotmelt molding process reliably protects components – even those without plastic shells – from environmental effects and facilitates rapid and reliable processing. At the exhibition electronica 2010, Henkel is presenting an extensive range of Macromelt hotmelts for the most varied requirements.

Modern car bodies contain numerous joint seals that must be reapplied when a repair is made.  Through the use of the new sealants Terostat 9120 SuperFast & Terostat 9320 SuperFast 6in1, workshops can shorten this process considerably. In combination with the patented PowerLine II / flat and wide-stream nozzle application system, the seals can also be given a true OEM look. 

The multimedia age makes the consumer's attention a rare and precious resource. So when it comes to print media and product packages, the more exclusive the design of the print product, the better the chance of standing out from the crowd. For overprint finishing, in particular, Henkel has a portfolio of innovative UV coatings and lacquers, which it will be presenting at the FachPack 2010 fair. One special highlight is MiraFoil, an innovative effect lacquer that gives surfaces a brilliant and radiant metallic gloss.

In package manufacturing, the use of sustainable adhesive technologies is a key factor for success. They make an important contribution to improving the eco-efficiency of production processes, while also offering real added value in terms of economy. With its well-known adhesive brands Technomelt and Adhesin, Henkel will be at FackPack 2010, presenting adhesive solutions for the packaging industry that combine first-class performance with responsibility toward people and the environment.

As a partner to the packaging industry, Henkel offers its customers not only powerful adhesive technologies but also the equipment needed to assure smooth and efficient production processes. At FachPack 2010, visitors will have an opportunity to learn about proven system solutions that enable reliable quality control and help to achieve lasting cost reductions.

In the last few years, development work on advanced structural adhesives has consistently contributed to the realization of increasingly efficient wind turbines. For demanding applications in the wind energy industry, Henkel will be presenting innovative adhesive technologies as well as highly effective mold release agents for perfect processing of composites at HUSUM WindEnergy 2010.

Aiming to meet the rising technological demands of the railroad industry through practical solutions, Henkel is presenting itself at InnoTrans 2010 in Berlin as an expert partner for adhesives, sealants and surface treatments. Visitors to the Henkel booth in Hall 8.2 will find a 360 degree panorama of products and services for manufacturing, assembly and maintenance of rail vehicles and railroad infrastructure equipment.

At today’s Investor and Analyst Day, Henkel provided an exhaustive insight into the markets, portfolio and growth drivers of its Adhesive Technologies business sector. The world’s leading supplier of adhesives regards itself as being well positioned for profitable organic growth. Thomas Geitner, Executive Vice President Adhesive Technologies, was confident that the business sector was well set to make a major contribution to the achievement of Henkel’s financial targets for 2012.

From Hall 1, Level 3, Stand A14 at the European Photovoltaic Solar Energy Conference (EU PVSEC) in Valencia, Spain, Henkel will display some of the company’s most recent innovations in electrically conductive adhesive (ECA) technology. These latest advances address the low stress, faster cure speeds and lower temperature curing requirements for modern thin-film and crystalline silicon (c-Si) module assembly and, when paired with Henkel’s global support network and materials expertise, provide an unmatched solution for today’s photovoltaic manufacturing specialists.

Recognized for its ease of use and cost-effectiveness with die attach processes for leadframe packages, Henkel has extended its Wafer Backside Coating (WBC) portfolio to also include a solution for stacked die packages. Ablestik WBC-8901UV has been designed to address the demanding requirements of multiple die stack applications for the memory market segment, including packages such as TSOPs, MCPs and FMCs (Flash Memory Cards).

Modern coatings for light metals involve highly specialized processes that have to fulfill many different requirements. In addition to high-performance corrosion protection, the use of environmentally sound production methods is playing an increasingly important role for metal-processing businesses. As a specialist in surface treatments, Henkel is setting industry-wide benchmarks with its broad product portfolio. At ALUMINIUM 2010, the company will be presenting sustainable coating technologies under its Alodine brand that unite top quality with responsibility toward people and the environment.

Extremely productive manufacturing processes and new concepts for saving materials and energy are vital to the future viability of the solar industry. To meet the challenges facing the market, Henkel develops innovative adhesives and sealants. At the 25th European Photovoltaic Solar Energy Conference in Valencia, the company will be presenting powerful solutions spanning the entire value chain.

Manufacturing of adhesive tapes for consumer use and industrial applications is a highly specialized industry with high potential for the future. The success of any adhesive tape depends to a large extent on the adhesive itself, which has to satisfy a wide variety of requirements. At the Henkel Tapes Symposium 2010, adhesive tape manufacturers from all over Europe came together to learn about the latest technologies and industry trends in the market for pressure sensitive adhesives.

Just a few months after its launch, the newly developed Technomelt Supra Cool 130 from Henkel has already surpassed the high expectations put on it. Its benefits include high bond strength, excellent thermal stability, outstanding flowability, and a broader application spectrum than EVA-based hotmelts – and all of this at a processing temperature of only 130°C in the melter.

Addressing the challenges posed by traditional greases and phase-change thermal interface materials, Henkel has developed and commercialized Loctite PowerstrateXtreme Printable (PSX-P), a new print-friendly thermal management product.

Mind the Gap! Anyone who has traveled on the London Underground will be familiar with this safety notice. But “minding the gap” was also something that people had to do when using instant adhesives. With Loctite 3090, Henkel has now developed the first gap-filling instant adhesive, thus considerably expanding the range of uses.

Never content to rest on the laurels of its proven lead-free success, Henkel has developed and launched Multicore LF620: a new lead-free solder paste that effectively delivers on a broad range of demanding requirements, essentially offering a lead-free paste that has it all.

Building on a rich history of industry honors and product accolades, Henkel Corporation was once again recognized for its innovation initiatives at the recent APEX event in Las Vegas, Nevada. Two of the company’s most recent product advances, Loctite PowerstrateXtreme Printable (PSX-P) and Hysol ECCOBOND CA3556HF, were at the top of the leaderboard for two well-established honors programs.

Henkel provides clear benefits for composite customers with innovative solutions in structural bonding and mould release. From April 13 to 15, these technologies will be in the focus at the Henkel booth at JEC 2010 fair in Paris. The aim is to demonstrate the advantages of the products and exchange experiences with experts.

In aircraft engineering, there is an ongoing trend toward lightweight construction. New manufacturing methods and products for fiber reinforced composites lead to faster and cost-efficient production processes. For its innovative benzoxazine prepreg resin and film adhesive for Airbus A380 Auxiliary Power Unit housing Henkel and its partner Toho Tenax were selected as a JEC Innovation Award finalist.

At the JEC 2010 Henkel presents its wide range of product solutions which facilitate the manufacture of composite bonding in aircrafts. Especially for surface preparation Henkel has introduced the new resin-impregnated wet peel plies Hysol EA 9895 and 9896 WPP. Supplied in film form they were developed to increase bonding durability and to eliminate contamination of composite surface from dry peel fragments.

“Hidden champions” is the phrase that Thomas Geitner, head of the Adhesives business at Henkel, likes to use when talking about his products – because though they are mostly never seen, they are nearly always indispensable. The future potential of this advanced joining technology is just as strong as ever, even after a challenging year like 2009. Henkel’s Adhesive Technologies business sector is therefore well positioned for profitable organic growth.

A slight, but unmistakable scent of vanilla pervades the hallway, and the attention of the visitor is captured by the nostalgic beauty of some antique Italian motorcycles decorating the room. What seems like the entrance to an exclusive spa or a fancy hang-out for motorcycle enthusiasts actually leads to a showroom for water taps and showerheads. But if you associate water taps and shower heads with the appropriate aisle in the hardware store, you need to think again.

Whoever travels from Europe or the American East Coast to Asia will fly over the Persian Gulf. Due to the geographic location and the young, up-coming airlines of the gulf-states, the Middle East Region records massive growth across all segments of the aerospace industry and leads in many ways in terms of innovation and expansion. For the second time now the MRO Middle East Conference & Exhibition takes place in Dubai. As a supplier of innovative adhesive systems for the aerospace industry, Henkel is also well represented at this event.

Around the world, Henkel has an extensive commitment to motor sports where reliable performance must be delivered in the most extreme conditions. At the Porsche Mobile 1 Supercup Henkel’s Loctite brand is once again present as an Official Technolgy Partner in 2010. With it’s cutting-edge adhesives and sealants technologies Loctite guarantees exceptionally high standards of race vehicle construction and maintenance for achieving best performance.

It all starts with an idea. A sudden thought. A solution to a recognized problem. But that is not enough. Those wishing to qualify for the ‘Fritz Henkel Award for Innovation’ have to implement that idea in practice – and prove its commercial viability in the marketplace. These are the criteria against which, each year, Henkel confers this much-coveted commendation on three winning teams of employees for the best product innovations.

Currently adhesives are as vital to medical engineering as they are to virtually every other branch of industry. The use of this still relatively young joining technology is also likely to further increase in the future. Under the Loctite brand, Henkel offers a wide range of specialty adhesives specifically developed for the production of medical equipment. In particular, light-cure adhesive technologies are playing an ever more important role in this segment. And Henkel is presenting its full, integrated spectrum of innovative solutions for this field at MEDTEC Europe 2010.

Weight-saving designs are essential in vehicle manufacturing in order to reduce resource consumption and costs. However, the new lightness of automotive being does have its price: noise in vehicle interiors is an undesirable consequence of this trend. With its new Terophon HDF, Henkel has developed a novel and highly efficient acoustic damping material specifically for the automotive and transport industries.

The sixth time in a row the Henkel brands Loctite® and Teroson are official suppliers of Dakar Rally. On January 1, 2010 the starting signal for probably the most sensational rally raid will be given in Buenos Aires. This also marks the beginning of very busy times for the Henkel service team that is accompanying the drivers. Night by night their fast and efficient repairs ensure that the contestants will be able to make it to the starting line the next day.

There’s a war going on on the shelves, a battle for the consumer’s attention: The more exclusive the design, the better the chance of standing out from the crowd. This is especially true when it comes to print media and lifestyle product packages. With an advanced portfolio of UV-curable coatings and special finishings Henkel offers its customers innovative solutions to win this fight.

Henkel has improved the formulations of its most popular threadlockers – Loctite 243 and Loctite 270 – to meet the evolving industrial requirements and to enable use on an even broader range of substrates. The next generation of these general purpose products offers ultimate performance for new opportunities.

Now there is an easy way for body shops to get assurance that a repair work is done perfectly saving time and money on any potential re-work: simply apply Teroson QuickCheck, a new waterborne paint finish simulator from Henkel.

Newly developed Technomelt Supra Cool 130 from Henkel unites the best of both worlds: a processing temperature of just 130 °C – previously the preserve of EVA-based hotmelts – fused with all the benefits of Supra technology to give exceptionally high bond strength, outstanding flowability and a much wider range of application suitability.

When processing magazines and other soft cover products, bookbinders are faced with a constant worry. Since conventional PUR hotmelts take up to eight hours to cure, reliable quality checks are only possible after the completion of an entire job, even in the case of large print runs. In the worst case, this can mean a high level of wastage and complaints and generate high costs. Henkel is now taking this weight off bookbinders’ minds. At Frankfurt Book Fair 2009, the Company is presenting a PUR adhesives system that part-cures in a matter of minutes with the aid of UV light and permits immediate quality checks.

With its range of emission-reduced polyurethane hotmelt adhesives (PUR hotmelts), Henkel is setting new standards of occupational health and safety in the graphic arts industry. The innovative adhesives of the Purmelt MicroEmission series are a response to the growing awareness of the need for sustainable production processes in the industry and are recommended by accident insurance institutions. At Frankfurt Book Fair 2009, the Company is presenting not only improved products for spine binding, but also emission-reduced PUR hotmelts for side gluing and endpapering.

In the multimedia age, the consumer's attention is a rare and precious resource. When it comes to print media and lifestyle product packages, the more exclusive the design of the print product, the better the chance of its standing out from the mass of information and products. October 14 to 18, Henkel will present MiraFoil on Frankfurt Book Fair 2009, an innovative effect lacquer for overprint finishing that gives surfaces a brilliant and radiant metallic gloss.

Right from its inception 140 year ago to today, the Berger printing company has been in the hands of its founding family. This Austrian concern with its long-standing traditions is currently being managed by members of the family’s fourth and fifth generations. Strict customer focus, able employees and the highest of quality standards have made Berger in Austria one of the most successful companies in its industry. Now, together with Henkel, these master printers are also setting new standards in occupational health and safety.

Offering exemplary manufacturing cost-efficiency, pasting is among the most important of the post-print process technologies. And hotmelts offer a particularly decisive advantage in such applications: because they cool within seconds, yet produce an almost instant adhesive bond of sufficient strength to enable high production speeds. Hence Henkel will be providing an overview of the performance capabilities of its Technomelt hotmelts at the 2009 Frankfurt Book Fair.

Solar power is becoming an ever more important ingredient in the energy mix of the future. As a system supplier offering innovative adhesives, sealants and cleaners for the entire value chain of the photovoltaic industry, Henkel has a significant role to play in this domain. And at the end of September, the company will be presenting its solutions for this sector at the 24th European Photovoltaic Solar Energy Conference (EU PVSEC) in Hamburg, Germany.

From September 21 to September 25, Hamburg will be donning the guise of center of the solar system as it hosts the 24th European Photovoltaic Solar Energy Conference (EU PVSEC). During the first four days, the conference will be accompanied by an exhibition for which 800 companies have registered, among them Henkel.

End of September will bring the who’s who of the photovoltaic industry to the 24th European Photovoltaic Solar Energy Conference in Hamburg. At the accompanying trade fair (September 21 – 24) Henkel shows a broad variety of solutions covering the entire photovoltaic process chain. Take for example the electrically conductive adhesives from Henkel’s Emerson & Cuming™ Range.

Within the beverage sector, drinktec is regarded as a premier forum for innovations with global reach. This world-leading trade show, to be held at Munich’s Neue Messe site between September 14 and 19, will be showcasing 1,500 exhibitors from some 70 countries and is expected to attract around 70,000 visitors from more than 160 countries. Henkel will also be around in Munich, presenting a range of sustainable solutions for the beverage industry.

The whole world of welding technology will be in the spotlight at the 17th international ESSEN WELDING FAIR. From September 14 to 19, 2009, the most comprehensive international fair in the sector will present a complete overview of the latest developments and innovations relating to all aspects of joining, cutting and coating. More than 1,000 exhibitors from 42 nations will be present in Essen, among them Henkel – for the first time.

The enormous power the Terex machines wield requires the reliability that Loctite adhesives and sealants can ensure. Locating studs of the differential or sealing of the rigid flanges. This is a perfect example of how Loctite products provide optimisation in production.

Henkel has developed novel water-miscible, bactericide-free cutting fluids. Even the addition of bactericides is unnecessary. The new Multan products are easy to use, decrease health risks to employees, and successfully implement prospective EU Biocides Regulations.

Henkel provides clear benefits for composite customers with innovative solutions in structural bonding, mould release and high-performance resins. From October 27 to 29, these technologies will be in the focus at the Henkel booth at COMPOSITES EUROPE 2009 fair in Stuttgart. The aim is to demonstrate the advantages of the products and exchange experiences with experts.

In the packaging industry, significant resources are often allocated to the job of cleaning adhesive residues from laminating machines. Indeed, manufacturers of flexible packaging invariably find themselves using large quantities of solvent-containing cleaning agents of the type subject to special labeling requirements. However, Henkel is able to offer a significantly more resource-efficient, environmentally sound and, in health terms, compelling alternative in the form of its specialty cleaner Liofol EcoPower.

… and something else is crucial for the success of a product: a wafer-thin layer of adhesive film providing perfect bonding of a label. Henkel is a supplier of highly performing adhesives and intelligent system solutions for all kinds of labeling applications in the beverage industry. The company will present its latest product innovations at Drinktec 2009 in Munich, Germany.

For the first time, Henkel can now offer laminating technician courses accredited by the Düsseldorf Chamber of Commerce and Industry (CoCI). Henkel’s Liofol Academy study program offers participants theoretical and practical training, leading to the qualification of laminating technician in the field of flexible packaging.

The use of hotmelt adhesives is becoming increasingly popular in textile lamination. When deciding on new plant investments, manufacturers are tending more and more to opt for the hotmelt lamination alternative – simply because of the many advantages that this offers over conventional technologies.  As a world leader in the production of industrial adhesives, Henkel has a range of innovative product solutions for textile lamination to showcase at this year’s Techtextil trade fair in Frankfurt/Main, Germany.

This spring Henkel is launching two new products developed to meet the needs of a changing industrial society: The anaerobic adhesive Loctite 5188 and the anaerobic threadlocker Loctite 276 are a result of Henkel’s close co-operation with key players in the automotive and other industries. To harness the full power of the Loctite brand, the company is rumoured to be launching a massive advertising campaign soon in addition to the product launch.

With the majority of the electronics industry fully on board with lead-free manufacturing, solder paste materials requirements are now moving beyond basic functionality and toward more advanced, truly enabling capabilities. Addressing these needs, Henkel has engineered Multicore® LF700™, a new lead-free, halide-free solder paste that has been formulated to deliver a wider range of benefits and performance characteristics than older-generation and competitive products.

In a remarkable breakthrough for underfill materials development, Henkel has engineered and launched a new underfill system that delivers on an unprecedented array of complex and demanding requirements, including room temperature fast flow, low temperature cure and reworkability. The new material, Hysol® UF3800™, has been specifically designed for use with today’s CSP and BGA devices and is particularly well-suited for handheld communication and entertainment applications.

Advancing the performance of electrically conductive film technology, Henkel has developed and launched Emerson & Cuming® CF3366™, a ground-breaking film technology that offers a robust alternative to traditional conductive materials.

Customers are the real winners in Henkel’s recent acquisition: The merging of Acheson’s Forging and Pressure Die Casting competencies into the Henkel fold is creating an exceptionally broad portfolio of solutions for the metal industry.

Customers are the real winners in Henkel’s acquisition of National Adhesives.

EASY-PAC from Henkel

R&D Cooperation with Henkel pays off

Henkel at the MRO Middle East Conference and Exhibition 2009

New adventure – proven quality

Innovation leap from Henkel: First PU-adhesive to be certified by Germanischer Lloyd for bonding rotor blades

Loctite® in Porsche Motorsport in 2009

Innovations for the automotive industry

More than 10 years of Henkel-experience with chrome-free pretreatment of aluminium

Unique Event For The Packaging Industry

Integration of National Starch businesses progressing on fast track

Composite materials for the aerospace industry

Central Europe Rally ends successful for Henkel

Diisobutyl phthalate (DiBP), a plasticizer frequently used until now in adhesives for the paper converting industry, is suspected of being harmful to health. The German manufacturers and processors of paper, board and cardboard have therefore undertaken to stop using products containing DiBP. To protect consumers in the long term, Henkel has now come up with a solution – the Adhesin A 78 Series, a new generation of plasticizer-free adhesives formulations for all applications in the paper and packaging industry.

Adhesives business significantly strengthened

A huge leap in metal coating

Henkel at the Central Europe Rally 2008

Three employee teams receive coveted Fritz Henkel Award for Innovation 2007

Thomas Geitner to succeed Alois Linder in October

Henkel presents its Adhesin A 78 series, a new generation of plasticizer-free dispersion adhesives for packages

Official Partner to the 2008 Euromilhões Dakar Rally

For more than 15 years now, Henkel has been putting adhesive bonds to the test at the Global Engineering Center in Garching near Munich. Customers from all branches of industry benefit enormously from the know-how of the adhesive experts there.

Henkel’s industrial division is a major supplier to the international air-conditioning industry. Up to now the main focus of the product portfolio has been on pre-treatment products and cleaners as well as adhesives and sealants for the manufacture of the casings. Now the product range has been extended to include a range of the special lubricants required in large quantities in the manufacture of heat exchangers. Users benefit not only from enhanced performance and lower consumption, but also from improved health and safety aspects.

Numerous breweries and mineral water bottlers are indirectly affected by higher world market prices for dairy products. Traditionally used labeling adhesives contain casein obtained from cow’s milk. The price of casein has recently risen dramatically and, in the opinion of raw materials experts, is unlikely to decrease shortly. As an alternative, Henkel supplies innovative casein-free adhesives that perform equally well.

From September 26 to 29, Henkel is presenting the latest developments in pressure-sensitive adhesives and UV coatings for hotmelt coaters and label printers at the LabelExpo 2007 in Brussels. The focus is on single-source, mutually adapted systems solutions and premium products for label converting. Henkel's appearance at the LabelExpo will provide greater insights into points raised at Henkel’s 2^nd Open House for label printing and converting, held in Düsseldorf in May 2007, which drew over 150 customers and technology partners from all over Europe.

Enhancement of global market position planned

A celebration gala - in honor of the board member

1:3 share split proposed

Effective April 1, 2007, the Consumer and Craftsmen Adhesives and Henkel Technologies business sectors will be merged to form the new Adhesives Technologies business sector, with total sales of 5.5 billion euros realized in fiscal 2006. 

On January 6 the starting signal will be given for the 29th edition of the 16-day race across the desert and Henkel will be in. As Official Supplier to the 2007 Euromilhões Dakar Rally, the company will support all competitors during the race by providing them with Loctite® and Teroson branded products.

The sun is one of the key energy sources of the future. For customers and partners of Solar Integrated Henkel has developed adhesives and sealants to enable the implementation of a groundbreaking technology: the solar roof off the roll.

To win the Fritz Henkel Award for Innovation a product idea must have two essential attributes: a convincingly innovative character and successful market performance.