Let go at the right moment: Henkel's new hot melt adhesive for PET bottle labeling

Against the backdrop of regulatory requirements, PET is becoming an increasingly important raw material. According to the proposed EU Packaging and Packaging Waste Regulation ‏(PPWR), PET bottles must be designed so that they can easily be recycled. At the same time, binding specifications for the use of recycled material apply. Starting in 2025, single-use PET bottles must contain a minimum of 25 percent recycled material, increasing to 30 percent by 2030. However, the current reality lags with this potential. While over 60 percent of PET bottles are collected in Europe, the PET value chain could return over 11 billion additional bottles to the recycling cycle annually. Residues that render the material unusable often stand in the way of effective recycling.

Conventional hot melt adhesives, which are commonly used for PET bottle labeling, are difficult to remove during the recycling process. Even in the hot caustic soda bath, which is part of the standard processing procedure, only 12 to 30 percent of the adhesive typically dissolves. The result is contaminated PET flakes that impair the quality of the recycled product due to cloudiness and yellowing. These flakes are also no longer suitable for applications such as food packaging due to their reduced barrier properties.

Henkel now offers Technomelt EM 335 RE, an adhesive tailored to the needs of modern recycling processes. It is alkali-dispersible and can be removed by up to 98 percent. The adhesive residue is separated from the material stream along with the label residue.  Technomelt EM 335 RE impresses not only with its recycling capabilities but also with its high performance. This hot melt adhesive is ideal for paper and plastic labels. It can reliably bond up to 40,000 bottle labels per hour and boasts a low processing temperature of 110 to 140°C. This protects equipment, saves energy, and increases operational reliability. Due to its mineral oil-free formulation and compliance with food regulations, the hot melt adhesive is suitable for even the most sensitive applications. Its practical packaging in X-tra chubs ensures easy and safe handling while avoiding packaging waste.

PETCYCLE in Germany has already approved Technomelt EM 335 RE, which opens new possibilities for a functioning circular economy. It supports bottlers and recyclers in reliably meeting new regulatory requirements. Thanks to an adhesive that only sticks for as long as needed, bottle after bottle can be recycled reliably.